XRF Pellet Dies | Automatic Eject Pellet Die

CLICK HERE FOR PRICING

XRF Pellets – high throughput, high quality

The Apex® Quick Release die makes XRF sample pellet preparation faster and more simple than ever before.

The patented automatic pellet eject sleeve enables the release of the finished XRF pellet, without the requirement to reset the die at an inverted position, at the middle point of the sample pressing cycle.

  1. Following the compression of the sample, the release of the pellet results in the ejector tabs swivelling  and capturing the ejection sleeve in a release position.
  2. Re-applying the load enables the completed XRF sample pellet to be pushed clear of the die body and released for user collection.

When used in conjunction with the Specac Atlas™ Autotouch automatic Hydraulic Press, the two  steps can be programmed into the laboratory press to automatically and seamlessly take place in sequence, without manual by the operator. 

The Apex® Die improves consistency by reducing space to human error, and increases throughput by speeding up pellet preparation. Less time is spent dissembling dies and awkwardly removing pellets. More time can be spent on analysis and increasing the quantity of pellets prepared.

Watch this video to learn more

Request a quote for the Apex® Quick Release Die

For an Apex® Die price, contact us for a free quote.

CLICK HERE FOR PRICING

Standard XRF Dies

Specac also manufacture high-quality pellet die sets with highly polished stainless-steel internal pressing pellets. Available in evacuable and non-evacuable formats and with optional tungsten pressing plates to avoid Fe contamination. 

Lightweight XRF Dies

These smaller evacuable die sets have fewer internal parts and are easier to handle.

Read More
  • Auto-Eject Die
  • Standard Dies
  • Documents
Apex™ Quick Release Die
  • 32mm Apex™ Die – Standard 32mm Apex™ Quick Release Die with Top pressing Anvil for 8, 15 & 25T Autotouch Presses – Max Load 40 tonnes  GS26302
  • 40mm Apex™ Die – Standard 40mm Apex™ Quick Release Die with Top pressing Anvil for 8, 15 & 25T Autotouch Presses – Max Load 40 tonnes. GS26301
  • 32mm Apex™ Die – 40T 32mm Apex™ Quick Release Die with Top pressing Anvil for 40 tonne Autotouch Presses – Max Load 40 tonnes  GS26304
  • 40mm Apex™ Die – 40T 40mm Apex™ Quick Release Die with Top pressing Anvil for 40 tonne Autotouch Presses – Max Load 40 tonnes  GS26303
 
XRF Pellet Dies
  • 32mm Atlas™ Standard Die 32mm Atlas™ Standard Die with evacuation port (max. load 40 Tonnes). GS26101
  • 32mm Atlas™ Standard Die 40mm Atlas™ Standard Die with evacuation port GS26102
  • 40mm Atlas™ Standard Die 40mm Atlas™ Standard Die with evacuation port (max. load 40 Tonnes). GS26102
  • 40mm Atlas™ Standard Die 40mm Atlas™ Standard Die (no evacuation port – max. load 40 Tonnes). GS26104
 
Data Sheets
  • Apex Quick Release Datasheet

    The Apex Quick Release Die is a revolutionary XRF pellet preparation device, greatly speeding up pellet compression and retrieval (2.5 MB).

Features

  • 32mm and 40mm pellet sizes
  • Ejects pellet without awkward user handling
  • Works seamlessly with Autotouch automatic press cycle
  • Premium build material for durability
  • Simple design for easy use