Quote Request

Please select

• --Base Plate-- Analect RXF 40, 60 Varian/Biorad FTS & 40, 60, 100, 155 Varian/Biorad Excalibur Intelligent Bruker 33 Quicklock Mattson Galaxy, Genesis Nicolet 500, 700, Impact PerkinElmer 1600, Paragon, RX, BX Other Please Select and Enter Details Below Bomem MB100 (Arid Zone - Non-Kinematic) Bruker 25,66,88,Vector Nicolet 205 PerkinElmer 1700 without Shuttle PerkinElmer 1700 with Shuttle Bomem MB100 (Non-Kinematic) Bomen MB100 (Kinematic) Bruker 45,48,85 Bruker 113v Jasco All models Mattson 1000 Midac All models PerkinElmer System 2000, Spectrum 2000 and GX PerkinElmer Spectrum One Pye Unicam 9600 Shimadzu 8100 Spectronic Interspec 2000 Not Required - Spares Only
• --HTHP Cell Accessory-- GS05850 – High Temperature/High Pressure Cell system GS05855 – Advanced High Temperature/High Pressure Cell system GS05860 – Reflectance Mode Kit GS05865 – HTHP Replacement Seal kit GS05867 – HTHP Replacement ZnSe Windows Assembly GS05868 – HTHP Decomposition pans - Spare Set (2) GS05869 – HTHP Replacement Burst-Disk GS05902 – HTHP Replacement seals for window housing

 

Let us know any special requirements you have:

Product Feedback

How do you compare this product against competitive offers?

Needs Work -> Very Good
1	2	3	4	5

 

How would you improve this product?

Email address (optional)

High Temperature High Pressure Cell

Specac’s High Temperature High Pressure Cell (HTHP) Accessory is a multipurpose cell for the FTIR analysis of solid samples in transmission, decomposition, or specular reflectance modes. Sample temperatures up to 800ºC can be obtained and the cell can operate at pressures from vacuum (0.1 torr) to 1000 psi for in-situ reaction studies. 

 

The standard HTHP Cell (GS05850) can be used for transmission analysis of 13 mm diameter discs, or for decomposition spectral analysis of gases evolved from a solid sample held in a sample cup just below the beam height. Spectral reflectance measurements are facilitated by an alternative baseplate configuration with transfer optics, and with one of the standard window housings replaced with an angled window housing assembly. The parts required for this conversion are available as an upgrade kit GS05860, or provided as standard if the HTHP Cell is been ordered as the advanced version (GS 05855). Gas connections on the cell are provided for gas flow or purging purposes.

 

The HTHP Cell is manufactured predominantly from corrosion resistant and vacuum compatible materials. ZnSe windows and silicone seals are used as standard, but other window materials and seals can also be provided. Temperature control of the accessory is provided by a dedicated power controller.

 

Features and Benefits

• Solid sample transmission, decomposition, or specular reflectance analysis
• Easy interchange between analysis models
• Temperatures up to 800°C, and pressures from vacuum to 1000 psi
• Rugged and durable construction
• Safety approved electronics and safety burst disc

 

Ordering Information

High Temperature High Pressure (HTHP) Accessory

GS05850 – High Temperature/High Pressure Cell system

GS05855 – Advanced High Temperature/High Pressure Cell system

GS05860 – Reflectance Mode Kit

 

HTHP Accessories and Consumables

 

GS05865 – HTHP Replacement Seal kit

GS05867 – HTHP Replacement ZnSe Windows Assembly

GS05868 – HTHP Decomposition pans - Spare Set (2)

GS05869 – HTHP Replacement Burst-Disk

GS05902 – HTHP Replacement seals for window housing